Black and white photograph of No.1 coating station in the west wing of Building 2, Emulsion Department, at the Kodak Australasia Pty Ltd factory, Coburg circa 1963. This is the coating station with a C2SX hopper in position. The 'Snooperscope' is mounted in a convenient position to the right of the coating head below the control panel. Hopper suction is adjusted by the valves immediately below the coating sink. Five tempered water outlets and four tempered distilled water outlets in the holding sink give adequate supply for hopper jacket, and hopper flushing purposes. This photograph was accompanied by a typed information sheet describing the function of the room and the equipment used.
Part of a photographic album produced by Kodak Australasia Pty Ltd, Coburg, containing approximately 70 black and white 8 x 10 inch photographic prints of the Emulsion Department; plans of the plant; colour photographs of the Emulsion Department management staff and Development and Production Supervision staff.
The album belonged to Ian 'Charlie' Yelland, who worked for Kodak Australasia Emulsion Department for 46 years, retiring in 1978.
Description of Content
Coating station showing the hopper, valves, coating sink and control panel.
Black and white silver gelatin photograph, portrait format, with white border and two holes punched along the left edge.
Donation from Terry Yelland, 21/02/2013
Photograph, 8" x 10", Black & White
Handwritten in blue ink on the back of the photograph; '58' Stamped in blue ink on the back of the photograph; '64006 / 7' Printed in grey ink on the back of the photograph [repeated]; 'A KODAK PAPER'
Type of item
Image Dimensions - Photograph
202 mm (Width), 252 mm (Height)