Summary
Alternative Name(s): Hay Baler
Scale model of a portable hay press, made by Mr. Vic Middleton of Cororooke, Victoria, in 1983 as a direct copy of a full-sized machine. Scale 1:5. This item was modelled after a press originally made by Mitchell & Co. Pty. Ltd. of West Footscray, Victoria, about 1945.
Physical Description
Red metal hay press model. The press is operated by a series of gears and springs. The model has four yellow wheels.
More Information
-
Collecting Areas
-
Modelmaker
Mr Vic Middleton, Western District, Victoria, Australia, 1983
-
Manufacturer of Item Modelled
Mitchell & Co. Pty Ltd, Cross Street, Footscray West, Greater Melbourne, Victoria, Australia, circa 1945
Manufacturer of the original full-sized machine on which the model is based. -
Brand Names
-
Classification
Agriculture & rural life, Crop management - harvesting, Model hay presses
-
Category
-
Discipline
-
Type of item
-
Overall Dimensions
1318 mm (Length), 274 mm (Width), 434 mm (Height)
Overall length measured with bale guide lowered. Widest dimension measured across front wheels. Maximum height measured with magpie arm raised to highest point. Minimum height with magpie arm at lowest point = 320 mm.
-
Other Dimensions
608 mm (Length), 245 mm (Width)
Wheelbase x Track. Track width over front wheels = 245 mm. Track width over rear wheels = 200 mm.
-
Model Scale
1:5
-
Keywords
Hay Making Equipment, Models & Modelmaking, Agriculture & Farming
